Quantum Data 801GC, 801GF, 801GX Owner's And Programmer's Manual page 287

SEQK
Classification:
Command Syntax:
Limits:
Query Syntax:
Limits:
Query Response:
Description:
Other Required Cmds:
Example:
SEQL
Classification:
Command Syntax:
Limits:
Query Syntax:
Limits:
Query Response:
Description:
Other Required Cmds:
Example:
SEQuence Kill
Sequence memory management
SEQK <name>
<name> = a valid MS-DOS filename
(8 characters minus any extension)
SEQK? <name>
<name> = a valid MS-DOS filename
(8 characters minus any extension)
0 or 1
The SEQK command deletes a sequence by name. The query
returns a one (1) if the named sequence can be deleted. If sequence
is read-only or nonexistent, the query returns a zero (0).
None
S E Q K M Y _ S E Q / / D e l e t e
/ / " M Y _ S E Q "
SEQuence Load
Sequence memory management
SEQL <name>
<name> = a valid MS-DOS filename
(8 characters minus any extension)
SEQL? <name>
<name> = a valid MS-DOS filename
(8 characters minus any extension)
0 or 1
The SEQL command copies the sequence having a name equal
to <name> from sequence memory into the sequence edit buffer.
The query returns a one (1) if the named sequence can be loaded,
otherwise a zero (0) is returned.
An SEQU command must be executed after the SEQL command
to start running the sequence.
S E Q L M Y _ S E Q / / L o a d
/ / e d i t b u f f e r
S E Q U / / S t a r t r u n n i n g
/ / t h e b u f f e r
s e q c a l l e d
" M Y _ S E Q " d i r i n
t h e s e q u e n c e i n
6-161