Conversion Operations - Siemens SIMATIC S5-115U User Manual

STEP 5 Operations
8.2.6

Conversion Operations

Conversion operations convert the values in ACCUM 1. Table 8-16 provides an overview of the
conversion operations. Examples follow the table.
Operation Operand
CFW
CSW
Processing Conversion Operations
Execution of these operations does not depend on the RLO nor does it affect the RLO. The "CSW"
operation sets the condition codes (see Section 8.4).
STL
L DW 12 Load the contents of data word DW 12 into ACCUM 1.
CFW Invert all bits in ACCUM 1.
T QW 20 Transfer the new contents of ACCUM 1 to output word QW 20.
15
ACCUM 1
0 1 1 1 0 0 0 1
15
ACCUM 1
1 0 0 0 1 1 1 0 0 1 1 0 0 0 1 1
8-50
Table 8-16. Overview of Conversion Operations
One's complement
The contents of ACCUM 1 are inverted bit by bit.
Two's complement
The contents of ACCUM 1 are inverted bit by bit. Afterwards the
word 0001 is added.
H
Numeric Example
DW 12
0
1 0 0 1 1 1 0 0
CFW
0
Meaning
Explanation
In a system, normally open contacts
have been replaced by normally
closed contacts. If the information
in data word DW 12 is to maintain
its previous effect, DW 12 must be
inverted.
S5-115U Manual
EWA 4NEB 811 6130-02b