Performing A Peak Tdr Trace - JDS Uniphase HST-3000 User Manual

Performing a peak TDR trace

7 Optional. You can view a reference trace and live trace
several different ways by doing the following:
a Press the Results soft key
b Select one of the following:
To...
View a single trace
View both traces on top of each other
View the mathematical difference in the
two traces
View both traces on the same screen but
separated
8 For information on saving your results in graphical form,
see "Saving results" on page
Performing a dual trace is complete.
The HST-3000 can display minimum, maximum, and current
TDR traces over a test period. This feature is useful for
analyzing faults that occur intermittently.
To perform a peak TDR trace
1 Access the Copper Measurements menu (see
2 Press the 4 key.
3 Press the Start TDR soft key to get a live trace.
4 Press the Display soft key.
HST-3000 Copper Testing User's Guide
Chapter 5 Locating cable faults

Performing a peak TDR trace

Press...
the 4 key
the 5 key
the 6 key
the 7 key
167.
page 8).
43