Chapter 5 Locating cable faults
Locating faults using RFL
Locating faults using RFL
44
5
Press the 8 key to initiate peak analysis.
The bold line represents the current measurement; the
thin lines represent the minimum and maximum traces.
Performing a peak trace is complete.
The following procedure describes how to locate cable faults
using the RFL.
To locate a cable fault using RFL
1
Access the Copper Measurements menu (see
2
Press the 8 key to select Resistive Fault Locate.
The Resistive Fault Locate screen appears.
HST-3000 Copper Testing User's Guide
page
8).