Chapter 6
CPE Management Interface
Click the Reboot button. The CPE reboots.
b.
Section 6.5.2.3
Configuring EAP-TTLS Authentication
On the EAP-TTLS pane, you configure Extensible Authentication Protocol - Tunneled Transport Layer Security
authentication by specifying the authentication realm and a username and password. After configuring EAP-
TTLS, you must reboot the CPE.
Procedure: Configuring EAP-TTLS
1.
Click the WiMAX button. The Scanner Settings pane appears.
In the options panel, click the Authentication link. The Authentication Method pane appears.
2.
3.
On the The Authentication Method pane, click the Set TTLS button. The EAP TTLS pane appears.
Figure 78: EAP TTLS pane
4.
Set the EAP-TTLS parameters in the following fields:
Table: EAP-TTLS Authentication fields
Column
Realm
Username
Password
Confirm Password
Click the Apply button.
5.
6.
After changing and of the fields on the EAP TTLS pane, reboot the CPE:
a.
Click the Management button. The System Functions pane appears.
Click the Reboot button. The CPE reboots.
b.
90
Description
Specify the EAP-TTLS authentication realm.
Specify the EAP-TTLS user name.
Specify the password for the EAP-TTLS user.
Re-type the password to confirm it.
RUGGEDCOM WiN5100/WiN5200
User Guide
Configuring EAP-TTLS Authentication