Configuring The Access List - Siemens RUGGEDCOM WiN5200 User Manual

RUGGEDCOM WiN5100/WiN5200
User Guide
a. Click the Quick Start button. The Quick Start Settings pane appears.
b. Click the Reboot button.
Section 6.3.3

Configuring the Access List

If the Access List function is enabled, only MAC Addresses in this list will be able to pass data.
Procedure: Setting the Access List parameters
1. Click the Network button. The Network options appear in the options pane.
2. In the options pane, click the Access List link. The Access List pane appears.
Figure 69: Access List pane
3. Review and set the Access List settings in the following fields:
Table: Access List Configuration table
Field
Access List
Total Number of Entries
Max Number of Self-Learned Entries
4. Review and set the Access List settings in the following fields:
Table: Access List table
Field
MAC Address
Configuring the Access List
Description
Displays the setting for the Access List.
Values: Enable | Disable
Type a number in the field.
Displays the maximum number of Self-Learned Entries
Default = 1
Description
Displays the MAC Address.
Chapter 6
CPE Management Interface
79