Network Statistics - Siemens RUGGEDCOM WiN5200 User Manual

Chapter 6
CPE Management Interface
Field
Sent bytes
Sent packets
DL rate [Kb/sec]
UL rate [Kb/sec]
Section 6.4.4

Network Statistics

On the the Network pane, you can review LAN and RF network information and statistics. On this pane, you can
clear the network statistics.
Procedure: Viewing Network Statistics
Click the Statistics button. The General Statistics pane appears.
1.
In the options panel, click the Network link. The Network pane appears.
Figure 73: Network pane
2. View the LAN and RF network information in the following fields:
Table: Network Statistics fields
Field
Current LAN IP Address
Current RF IP Address
RF IP Default GW
DHCP Lease Time
84
Description
Displays amount of data sent by the CPE, in bytes.
Displays the number of packets sent by the CPE.
Displays the downlink rate, in kilobits per second.
Displays the uplink rate, in kilobits per second.
Description
Displays the current CPE LAN IP address. Use the LAN IP address when you access
the CPE through a direct connection to its physical Ethernet port.
Displays the current CPE RF IP address. Use the RF IP address when you access the
CPE through the RF network.
Displays the CPE default gateway on the RF network.
Displays the CPE default DHCP lease time.
RUGGEDCOM WiN5100/WiN5200
User Guide
Network Statistics