Chapter 6
CPE Management Interface
5.
Select the file to upload.
6.
Click the Load button to load the certificate or key.
7.
Click the Certificate Verify button to verify the passphrase, certificate and key.
Click the Apply button.
8.
9.
Reboot the base station:
a.
Click the Quick Start button. The Quick Start Settings pane appears.
Click the Reboot button.
b.
Section 6.2.5
Generating SSH Keys
Use the SSH Keys pane to reboot the base station and generate new SSH keys.
Procedure: SSH Keys
Click the Management button. The Management options appear in the options pane.
1.
2.
In the options panel, click the SSH Keys link. The SSH Keys pane appears.
Figure 44: SSH Keys pane
NOTE
Key generation can take up to 15 minutes to complete.
Click the Generate SSH Keys button. The base station reboots and generates new SSH keys.
3.
50
RUGGEDCOM WiN5100/WiN5200
User Guide
Generating SSH Keys