Siemens RUGGEDCOM WiN5200 User Manual page 44

Chapter 4
Installation Procedure
Figure 29: Connection Scheme
2. Connect a Category 5e cable between the PoE injector (Data+Power jack) and the CPE.
3. Connect a Category 5e cable between the Ethernet switch and the PoE injector (Data jack).
4. Connect the AC open-ended cable to the PSU.
Figure 30: Complete Class 1 Division 2 Installation Kit
CAUTION!
The power supply AC cord should be 3 wires, 18 AWG minimum, with a length of less than 4.5 m, and
safety certified according to national rules.
36
RUGGEDCOM WiN5100/WiN5200
User Guide
Hazardous Location Installation