Chapter 6
CPE Management Interface
Section 6.4.2
Device Info
On the the Device Info pane, you can review CPE hardware information. The Device Info pane is read-only;
there are no parameters to set on this pane.
Procedure: Viewing Device Information
1.
Click the Statistics button. The Statistics options appear in the options pane.
In the options pane, click the Device Info link. The Device Info pane appears.
2.
Figure 71: Device Info pane
3.
View the Device information in the following fields:
Table: Device Info table
Field
Serial Number
Calibration Version
RF ID
HW ID
Section 6.4.3
RF Statistics
On the the RF Statistics pane, you can review CPE RF status and information. The RF Statistics pane is read-
only; there are no parameters to set on this pane.
Procedure: Viewing RF Statistics
Click the Statistics button. The General Statistics pane appears.
1.
In the options panel, click the RF link. The RF pane appears.
82
Description
Displays the device's serial number.
Displays the device's calibration version.
Displays the device's radio frequency identification number.
Displays the devices's hardware identification number.
RUGGEDCOM WiN5100/WiN5200
User Guide
Device Info