Siemens RUGGEDCOM WiN5200 User Manual page 73

RUGGEDCOM WiN5100/WiN5200
User Guide
Figure 56: SNMPv3 Configuration pane
2. The Current SNMPv3 Status field displays the current status for the SNMPv3 system: Enabled or Disabled.
3. Review and set the SNMPv3 users in the Users table.
To add an SNMPv3 user, click the
parameters:
Table: SNMPv3 Users Table
Field
Username
Authentication Passphrase
Authentication Protocol
Privacy Passphrase
Privacy Protocol
Access Group
4.
To remove an SNMPv3 user, select a row in the Users Table and click the
clicking the button removes the last entry in the table.
5. Click the Apply button.
6. To view the SNMPv3 access groups, click the Access Groups button. See
SNMPv3 Access
SNMPv3 Configuration
button. A new row appears in the Users Table. Enter the following
Description
The user name.
The passphrase used for authentication.
Select the authentication protocol for the user.
Value: HMAC-SHA1
The passphrase used for privacy.
Select the privacy protocol.
Value: CBC-DES
Associated the user with an SNMPv3 Access Group.
Groups".
CPE Management Interface
button. If no rows are selected,
Section 6.2.9.4, "Viewing
Chapter 6
65