RUGGEDCOM WiN5100/WiN5200
User Guide
NOTE
Before copying the file, ensure that it does not already exist in the "Secondary" memory bank. If
the file is present in the "Secondary" memory bank, delete the file from the "Secondary" memory
bank before copying. For instructions on how to delete files from the "Secondary" memory bank,
see
• Select a file from the Primary Components Table.
• Click the Copy File.
6.
To copy all files to the "Secondary" memory bank:
• Click the Copy directory.
Section 6.2.8.5
Managing the Secondary Memory Bank
Use the Secondary Components pane to manage software in the "Secondary" memory bank. On this pane, you
can view information for the files in the memory bank, upload files from the memory bank to your FTP server, and
delete files from the memory bank.
Before uploading files to an FTP server, you must configure an FTP server on the FTP Server Properties
pane. For instructions on how to configure the FTP server properties, see
Software".
Procedure: Viewing files in the Secondary memory bank
1.
Click the Management button. The Current Status pane appears.
2.
In the options pane, click the SW Upgrade link, and then click the Secondary Bank link. The Secondary
Components pane appears.
Managing the Secondary Memory Bank
Section 6.2.8.5, "Managing the Secondary Memory
CPE Management Interface
Bank".
Section 6.2.8.3, "Downloading CPE
Chapter 6
59