Table of Contents
Advertisement
RUGGEDCOM WiN5100/WiN5200
User Guide
NOTE
When mounting the antenna/enclosure to a 1"-1.75" pole, note the orientation of the clamping
bracket in the illustration.
Figure 13: Mounting the Antenna/Enclosure to a Pole
4.
Adjust the position of the CPE unit. For more information about how to align the CPE Antenna, refer to
Section 4.9, "Aligning the CPE
5.
Tighten the screws connecting the clamping bracket to the mounting bracket. Make sure the screws are
torqued to 14 Nm (10 ft. lb.).
Section 4.7
Wall Mount Installation
To following procedure describes how to mount the CPE unit to a wall.
Wall Mount Installation
Antenna".
Chapter 4
Installation Procedure
25
- Quick Links:
- Connecting to and Logging in to...
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RUGGEDCOM WiN5200 and is the answer not in the manual?
Questions and answers