RUGGEDCOM WiN5100/WiN5200
User Guide
Figure 19: RJ45 Connector Components and Cable
2.
Refer to
Figure 20
• Strip at least 22mm (0.71 inch) of sheathing from the end of the cable.
• Remove the inner jacket and foil, leaving 10mm (0.25 inch) of inner jacket and the drain wire.
• Fan the pairs into the proper color code and trim the conductors, leaving 12mm (0.47 inch) extending from
the inner jacket.
Figure 20: Preparing the CPE Cable
Figure 21: Pin Arrangement
Assembling the RJ45 Connector
and
Figure
21.
Chapter 4
Installation Procedure
31