Siemens RUGGEDCOM WiN5200 User Manual page 31

RUGGEDCOM WiN5100/WiN5200
User Guide
Figure 10: Mounting Bracket to Antenna Assembly
2. Secure the antenna/enclosure base bracket to the antenna using nuts, washers and spring washers. Make
sure the nuts are torqued to 24 Nm (17.7 ft. lb.).
Procedure: Securing the Mounting Bracket to the Enclosure
1. Place the antenna/enclosure base bracket against the back of the enclosure. Make sure it is oriented with
the elevation axis.
Figure 11: Mounting Bracket to Enclosure Assembly
Mounting Bracket Installation
Chapter 4
Installation Procedure
23