Radius Login - Siemens RUGGEDCOM WiN5200 User Manual

RUGGEDCOM WiN5100/WiN5200
User Guide
▪ A reboot due to a watchdog reboot.
▪ The Reboot button was pressed.
▪ The CPE rebooted from the base station.
NOTE
Management traffic to/from the CPE will always pass through.
Use the Ethernet Lock pane to lock the CPE.
Procedure: Setting the Ethernet Lock parameters
1. Click the Management button. The Management options appear in the options pane.
2. In the options pane, click the Ethernet Lock link. The Ethernet Lock pane appears.
Figure 63: Ethernet Lock pane
3. Review and set the Ethernet Lock settings in the following fields:
Table: Ethernet Lock table
Field
Ethernet Lock
Data Forwarding
4. Click the Apply button.
Section 6.2.14

Radius Login

Use the Radius Login pane to set radius login authentication settings for remote login.
Procedure: Setting the Radius Login parameters
Click the Management button. The Management options appear in the options pane.
1.
Radius Login
Description
Displays the setting for the Ethernet Lock.
Values: Enable | Disable
Displays the setting for Data Forwarding.
Values: Allowed | Blocked
Chapter 6
CPE Management Interface
73