Siemens RUGGEDCOM WiN5200 User Manual page 76

Chapter 6
CPE Management Interface
System Alarms
The System Alarms pane displays current system alarms. This pane is read-only; there are no parameters to set
on this pane.
Procedure: Viewing System Alarms
1. Click the Management button. The Management options appear in the options pane.
2. In the options panel, click the Alarms and Traps link. The System Alarms pane appears.
Figure 59: System Alarms pane
3. Review the current number of alarms in the following fields:
Table: System Alarms
Field
Number of Critical Alarms
Number of Major Alarms
Number of Warning Alarms
4. Review the current alarm settings in the Alarms Table:
Table: Alarms Table
Column
ID
Name
Status
68
Description
Displays the number of critical alarms.
Displays the number of major alarms.
Displays the number of warning or advisory alarms.
Description
Displays the alarm type identification number.
Displays the alarm type. For a list of alarm and trap conditions, see
"SNMP Traps List".
Indicates if the alarm type is enabled or disabled.
RUGGEDCOM WiN5100/WiN5200
User Guide
the section called
Alarms & Traps