Clean the Exhaust Blower Impellers and Housing
A thorough cleaning of the Exhaust Blower Impellers and Housing is vitally important to the stoves ability to burn cleanly and
efficiently.
Remove the access plate
and gasket from the side of
the exhaust box
NOTE: You will need to
have a replacement
gasket for reinstallation.-
SKU# 250-04450
Gently brush the impellers
the then vacuum the debris
Gently brush the impellers
the then vacuum the debris
Check gaskets
Leaking gaskets can cause poor performance in pellet appliances. If air is able to enter the firebox through a leak then it is not
being pulled through the burn platform and burning fuel. Leaking gaskets can also cause an ignitor to not light the pellets properly
as well. The following gaskets should be checked annually:
•
Door Gasket
•
Glass Gasket
•
Ashpan Door Gasket
•
Exhaust Blower Gasket
Door and glass gasket will often show leaks easily if you know what to look for. Generally, a leak in either of these two places will
cause a clean streak on the glass where the air is entering.
17602010 - 12/15/17
Page 64