Travis Industries Deerfield Service & Troubleshooting Manual page 47

12. Pull the wire up into the hopper.
13. Use a 3/8" ratchet to remove the nut, inside the hopper, that secures the right hopper hinge to the stove (see
below). Move the UI to the right and it will disengage from the bracket on the stove.
NOTE: Make sure to not drop the nut or washer into the hopper, it could possibly jam the HRD.
NOTE: When re-installing the UI make sure the washer is in place between the hinge and the bracket.
Remove nut
17602010 - 12/15/17
Page 47