Travis Industries Deerfield Service & Troubleshooting Manual page 42

5. Disconnect the exhaust blower from the stove by removing the (6) bolts with a 5/16" nut driver.. The top three are
accessible from above and the bottom three can be reached through the access that was uncovered in the step
above. Set bolts, washers and orange spacers aside for reinstallation.
Top three screws accessed from top
6. Carefully move the blower backward until the impellers are clear of the exhaust housing and remove the blower
from the stove. Take care not to damage or bend the exhaust blower impellers.
Bottom three screws accessed from rear access.
17602010 - 12/15/17
Page 42