Fireback Removal - Travis Industries Deerfield Service & Troubleshooting Manual

Fireback Removal

Make sure the stove has fully cooled (approximately 25 minutes) before conducting service. Unplug the
stove to prevent electrical shock.
1. Remove the visual deflector and burn platform (see section "Visual Deflector and Burn Platform Removal").
2. Lift the top center panel of the fireback up to release it from the notches on the lower panels. Lower one side
and guide the panel out of the firebox.
3. Lift up on one of the side panels to release the (2) tabs on the bottom of the panel from the notches in the
firebox. Guide the bottom of the panel forward until it can be lowered into the ashpan area.
17602010 - 12/15/17
Page 7