Side Panel Removal - Travis Industries Deerfield Service & Troubleshooting Manual

Table of Contents

Advertisement

Side Panel Removal

Make sure the stove has fully cooled (approximately 25 minutes) before conducting service. Unplug the
stove to prevent electrical shock.
1.
(Left panel only) Push the air restrictor rod all the way in and unscrew the knob from the end of the restrictor rod (set aside
for reinstallation).
2.
Remove the fastener on the back edge of the side panel. There is one screw for each panel.
3.
Slide the panel backwards slightly to release the small tab on the upper rear portion of the panel from the slot on the stove.
4.
Slide the panel back further to disengage the front tabs from the stove. The panel is now free and can be set aside.
Slide tab out of slot
on rear of stove
Slide front tabs out of
slot on side of stove
17602010 - 12/15/17
Remove the fastener
Page 35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Foxfire

Table of Contents