Deerfield - Removal Of Components; Visual Deflector And Burn Platform Removal - Travis Industries Deerfield Service & Troubleshooting Manual

Deerfield - Removal of Components

Visual Deflector and Burn Platform Removal

Make sure the stove has fully cooled (approximately 25 minutes) before conducting service. Unplug the
stove to prevent electrical shock.
1. Grab the front, middle of the visual deflector and lift up slightly to release the hooks from the pins on the side
of the housing (see below).
2. Lift the locking key up to release the burn platform from the stove (see below).
3. Grab the upper portion of the Burn Platform and pull forward. Once the hole in the back of the burn platform
clears the auger tube, you can angle the platform up and remove it from the stove.
17602010 - 12/15/17
Page 6