Page 34
Foxfire - Removal of Components
Visual Deflector and Burn Platform Removal
The process is the same as the Deerfield (see section "Visual Deflector and Burn Platform Removal" on pg. 6.
Fireback Removal
The process is the same as the Deerfield (see section "Fireback Removal" on pg. 7
Igniter Removal
The process is the same as the Deerfield (see section "Igniter Removal" on pg.16
Auger, Bushing Plate and Block Removal
The process is the same as the Deerfield (see section "Auger, Bushing Plate and Block Removal" on pg. 24
Chisel Removal
The process is the same as the Deerfield (see section "Chisel Removal" on pg. 26
Horizontal Rotating Disk (HRD) Component Removal
The process is the same as the Deerfield (see section "Horizontal Rotating Disk (HRD) Component Removal" on pg. 28
17602010 - 12/15/17