Travis Industries Deerfield Service & Troubleshooting Manual page 60

1. Open the door of the stove and vacuum the air wash just inside the door opening (see below).
2. Remove the visual deflector from the burn platform. Brush it clean and set aside for reinstallation. Vacuum off
the burn platform, scrap it clean with the stove tool provided with the stove or other scraper. Make sure all the
holes are free from obstruction.
3. Remove the burn platform from the firebox and set aside for reinstallation. Vacuum the ignitor area below the
burn platform.
17602010 - 12/15/17
Page 60