Testing Ac Power At The Board - Travis Industries Deerfield Service & Troubleshooting Manual

Testing AC Power at the Board

This portion of the PCB discussed in this section deals with high voltage. Only qualified personnel should test
this portion of the board.
To test the AC power leaving the PCB us a Multimeter at the pins indicated below.
AC power pins
Touch the AC Neutral pin with the black lead from your Multimeter and use the red to touch the other pins to verify the
voltage that is actually being sent to the component.
AC Neutral
Igniter
Push
Auger
Convection
Meter
Blower
Auger
17602010 - 12/15/17
AC Line
Combustion
Blower
Page 52