Adjusting The Blower Speed; Normal Operating Sounds - Travis Industries heritage bay Owner's Manual

Freestanding direct-vent
Hide thumbs Also See for heritage bay:
Table of Contents

Advertisement

O
PERATING
P
22
AGE

Adjusting the Blower Speed

+ The blower helps transfer the heat from the heater into the room. It will not turn on until the heater
is up to temperature (approximately 10 minutes after starting). See the illustration below for
instructions on adjusting the blower speed.
IGNITER

Normal Operating Sounds

Pilot Flame
The pilot flame,
which remains on,
makes a very slight
"whisper" sound.
Gas Control Valve
As the gas control valve is turned
on and off you will hear a dull
clicking sound. This is the valve
opening up and shutting down.
Y
H
OUR
EATER
OFF
PILOT
HI
LO
(C
)
ONTINUED
Blower Knob
Turn the knob all the way counter-clockwise to turn
the blower off. One click clockwise turns the
blower to high speed. Turning the knob clockwise
from the high position decreases the speed of the
blower.
Blower
This heater uses a
blower to push heated air
into the room. You will
hear the sound of air
movement that increases
as the speed is
increased.
The appliance may
creak with change of
temperature.
Blower Snap Disk
This part can
produce a clicking
sound as it turns the
blower on and off.

Advertisement

Table of Contents
loading

Table of Contents