Clean fines out of the HRD
Fines or sawdust debris from pellets can accumulate in the HRD over time. Humidity in the air can cause the fines to swell and can
impede the movement of the disks. We recommend the HRD be opened and cleaned annually.
For details on how to access and open the HRD, see section "Horizontal Rotating Disks (HRD) Components Removal".
Make sure to vacuum out the following areas on the HRD assembly:
Take care to reassemble the HRD with all components in the same order AND make sure not to turn any of the
components upside down. Improper reassembly could cause performance issues and could be a safety
hazard.
Top View
HRD
Vacuum
Here
17602010 - 12/15/17
Page 65