Rear Panel Removal - Travis Industries Deerfield Service & Troubleshooting Manual

Rear Panel Removal

Make sure the stove has fully cooled (approximately 25 minutes) before conducting service. Unplug the
stove to prevent electrical shock.
1. Remove the (3) 5/16" screws along the top and (3) additional screws along the bottom of the back panel. Lift up
on the panel using the handle on the top edge to disengage the bottom of the panel from the floor of the stove. Set
the screws aside for reinstallation.
17602010 - 12/15/17
Page 9