Arctic Cat EL TIGRE 1980 Service Manual page 137

(
Fig. 8·3
A926
9. Unwind th e rope from the recoil reel , untie
th e kn ot, and remove the rope.
Inspecting
NOTE: Whenever a part is worn excessive·
ly, cracked, defective, or damaged in any
way, replacement is necessary.
1. Inspect al I springs, washers, and pawls for
wear or damage.
2. Inspect the recoil reel and case for cracks
or damage.
3. Inspect the center hub for wear, cracks, or
damage.
4. Inspect the recoil rope for breaks or fray-
ing.
5. Inspect the recoil spring for cracks,
crystallization, or abnormal bends. .
6. Inspect the starter handle for damage,
cracks, or deterioration.
Assembling
Fig. 8·4
15
I
I
16
KEY
1. Starter Assembly
2. Reel
3. Pawl
4. Recoil Spring
5. Spring
6. Washer
7. Washer
8. Return Spring
9. Pawl Spring
10. Drive Plate
13
I
I
'
*
11. Lock Washer
12. Nut
13.
Starter Rope
14. Grip
15. Decal
16. Case
17. Bolt
18. Lock Washer
19. Pulley
20. Bolt
0720447
1. Hook the end of the recoil spring around·
the mounting lug in the recoil case.
2. Insert the recoil-spring wincing into the
recoil case in a counterclockwise direction
until the complete recoil spring is installed ..
•
•