Honda MBX50 Workshop Manual page 66

. CYLINDER HEAD/CYLINDER/PISTON
Remove the reed valve.
INSPECTION
Check the reeds for damage of fatigue and replace if
necessary. Replace the valve with a new one if the
seat rubber is cracked or damaged, or if there is
clearance between the reed and seat.
CAUTION
Do not disassemble or bend the reed stopper
as this may cause improper engine perfor­
mance. The reed valve must not be disas­
sembled. If the �tapper, reed or seat is defec­
tive, replace all as a unit ..
INSTALLATION
Installation of the reed valve is essentially the
reverse order of removal.
CAUTION
I Bleed air from the oil pass tube (Page 2-7).
After installation, check for secondary air leaks.
6-11
(1) REED VALVE
(1) REED STOPPERS
(1) CARBURETOR INSULATOR
�HONDA
� MBX50· MBX80
(2) REEDS
(3) REED VALVE SEAT