Transmission Assembly - Honda MBX50 Workshop Manual

�HONDA
� MBX50· MBXSO
Install the crankshaft in the right crankcase.
Use a special tool "CRANKSHAFT ASSEMBLY
TOOL (07965-1660100)" if it is hard to install
the crankshaft to the right crankcase.
NOTE
Apply clean 2-cycle engine oil to the
@
journal and crankpin bearings.
o Coat the sealing I ips of each oil seal with
grease.

TRANSMISSION ASSEMBLY

Drive the balancer weight in the right crankcase
while rotating the driver tool to prevent tilting the
balancer bearing.
Apply oil to the gears before installing the mainshaft
and countershaft.
Make sure the gears rotate freely.
CRAN l<SHAFT /TRANSMISSION
(2) BALANCER WEIGHT
(1) CRANKSHAFT
(1) BALANCER WEIGHT
DRIVER 07945-1660000
9-12