Download  Print this page

Inspection And Adjustment - Honda MBX50 Workshop Manual

Hide thumbs

Advertisement

NOTE
Tire pressure should be checked when tires
are COLD.
Check the tires for cuts, imbedded nails, or other
sharp objects.
RECOMMENDED TIRE PRESSURE AND TIRE
SIZE:
Cold tire pressure kPa(kg/cm
Up to 90kg
Tire size
( 1981b)
MBX50
Front 2.50-18-4PR
175(1.75,25)
Rear 2.75-18-6PR
175( 1.75,25)
MBXBO
Front 2. 75-18-4PR
200(2.0,28)
Rear 3.00-18-6PR
200( 2.0,28)
Check the front and rear wheels for trueness.
Measure the tread depth at the center of the tires .
Replace the tires if the tread depth reaches the
folowing limit.
Minimum tread depth:
Front:
0.8 mm (1/32 in)
Rear:
0.8 mm (1/32 in)
Check that all chassis nuts and bolts are tightened
to correct torque values.
Check all cotter pins and safety clips.
Remove the muffler (Page 5-3).
Remove the diffuser pipe attaching screw.
Remove the diffuser pipe from the muffler.
Clean the diffuser pipe with a bristle wire brush.
Remove carbon from inside the muffler.
CAUTION
Do not heat or clean with solvent in an at­
tempt to remove, carbon from the muff er.
Install the diffuser pipe and screw.
,psi)
2
Up to capacity
load
175(1.75,25)
280( 2.8,40)
200(2.0,28)
280( 2.8,40)
(2) MUFFLER

INSPECTION AND ADJUSTMENT

(3) DIFFUSER PIPE
DIFFUSER PIPE

Advertisement

Chapters

Table of Contents

This manual is also suitable for:

Mbx80

Comments to this Manuals

Symbols: 0
Latest comments: