Honda MBX50 Workshop Manual page 131

�HONDA.
� MBX50· MBX80
DISASSEMBLY
Remove the inner bolt.
NOTE
• Hold the fork tube in a vise with rag or
soft jaws avoiding the sliding surface as
shown.
CAUTION
The inner bolt is under spring pressure. Cover
the inner bolt and wrench during removal
to prevent injury caused by the bolt, wrench,
or spring flying upwards.
Drain the ATF (Automatic Transmission Fluid)
from the fork by pumping it up and down slowly.
FORK SPRING INSPECTION
Measure the fork spring free length.
SERVICE LIMITS: 482.5 mm (19.00 in)
FRONT WHEEL/SUSPENSION
(1) FORK INNER BOLT
11 .. 14