FRONT WHEEL/SUSPENSION
Remove the socket bolt.
Remove the fork tube, piston, rebound spring
and oi I lock piece.
CAUTION
Do not distort the slider in a vise.
FORK TUBE RUNOUT
Place the fork tube in V blocks and read the runout.
Take 1/2 of the total indicator reading to determine
the actual wear.
SERVICE LIMIT: 0.20 mm (0.008 in)
Remove the dust seal.
Remove the set ring with the snap ring pliers.
Remove the oil seal using the dull end of a screw
driver as shown.
NOTE
Avoid damaging the inner and outer surfaces
of the fork slider when removing the set
ring and oil seal.
11-15
(1) 6 mm HEX WRENCH
07917-3230000
(2) SNAP RING
PLIERS
�HONDA
� MBX50· MBXSO
(1) OIL SEAL
(3) RAG