Clutch/Idler Gear; Clutch Removal - Honda MBX50 Workshop Manual

CLUTCH/KICKSTARTER/GEARSHIFT LINKA GE
Install the right crankcase cover on the crankcase.
Install the clutch cable bracket and tighten with the
flange bolt.
NOTE
Tighten the bolts in a crisscross pattern and in
two or three steps.
Install the kickstarter pedal.
Connect the tachometer and clutch cables.
Connect the radiator hoses to the water pump.
Fill the transmission with recommended oil (Page
2-3).
Fill the cooling system with recommended cciolant
(Page 10-3).
Adjust the clutch lever free play (Page 3-7).

CLUTCH/IDLER GEAR

CLUTCH REMOVAL

Remove the right crankcase cover (Page 7-3).
Remove the clutch lifter plate and clutch springs
by removing the bolts.
7 ... 5
(1) KICKSTARTER PEDAL
(1) CLUTCH CABLE
(1) CLUTCH SPRINGS
(2) LIFTER PLATE
�HONDA
� MBX50· MBXSO
(2) RIGHT CRANKCASE COVER
(2) TACHOMETER CABLE
(3) RADIATOR HOSES