Monitoring the Reciter
Alarm status
Received signal
Input lines
Output lines
TB8100 Service Kit User's Manual
The Reciter form (Monitor > Monitoring > Reciter) lets you monitor the
RSSI
and
SINAD
of the received signal and the audio levels on the input and
output lines. Each level is displayed graphically as a gauge. The equivalent
numeric value appears under the gauge heading. If the value is red, it has
exceeded the maximum or fallen below the minimum that the gauge can
display.
The first box in the form displays the internal name of the reciter.
The Alarm status box indicates whether the reciter has an alarm. If the LED is
red, select Monitor > Alarms > Current Status to see which alarm is active.
The Received signal area displays the RSSI and SINAD levels. (If you want to
know the equivalent RSSI in microvolts, see
and dBm" on page
78). The SINAD is only an approximation.
The Input lines area displays the audio levels for the balanced and unbalanced
line inputs.
The Output lines area displays the audio levels for the balanced and unbalanced
line outputs.
"Converting Between Microvolts
Operational Information 63