Editing A Connection - Tait TB8100 User Manual

Editing a Connection

TB8100 Service Kit User's Manual
5. In the Modem protocol box, select CCDI 2.0 if the radio modem is a Tait
radio that supports CCDI2. Otherwise, select RF modem. The equipment
connected to the BSS must have the same setting.
6. In the Serial port number box, select the port on your PC that the radio
modem is connected to.
7. If the radio modem doesn't use CCDI 2.0, define the other communications
settings. (These settings are fixed for CCDI 2.0.)
8. Set appropriate polling intervals. The Alarms and Monitoring boxes limit
how often the Service accesses the base station to obtain alarm and
monitoring information. These intervals need to be long if the equipment
is sharing the channel.
9. Click OK. The new connection now appears in the Connections dialog
box.
You may need to modify the settings of an existing connection, for example, if
a telephone number changes or if the link is too slow for the polling intervals
you selected.
To edit a connection
1. Select Tools > Configure Connections. The Connections dialog box
appears.
2. Click a connection to select it.
3. Click Edit. The Edit Connection dialog box appears.
4. Modify the settings as desired. For information about individual settings, see
"Adding a Connection" on page
5. Click OK.
34.
Setting Up and Configuring Connections 37