Logging Off And Disconnecting - Tait TB8100 User Manual

Logging Off and Disconnecting

TB8100 Service Kit User's Manual
When you have finished working with a base station, click Log Off to log off
or Disconnect to disconnect from the BSS. Logging off lets you immediately
log on to the other base station in the BSS.
If the base station is in Standby or Download mode, you are reminded of this
and asked to confirm that you want to proceed. This is to make sure that you
do not inadvertently leave the base station out of service when you end a
Service Kit session. Select No to cancel logging off or disconnecting, and then
change the base station's mode back to Run before logging off or
disconnecting.
Logging Off and Disconnecting 47