Tait TB8100 User Manual page 217

channel profile
channel spacing
channel table
CODEC
configuration file
connection
control bus
control panel
CTCSS
custom action
custom input
TB8100 Service Kit User's Manual
A channel profile is a named set of configuration items relating
to the base station's RF configuration, transmitter power output
and power saving modes. Like the signalling profile, it can be
applied to any channel. Together, these profiles define most
configuration items.
Channel spacing is the bandwidth that a channel nominally
occupies. If a base station has a channel spacing of 12.5 kHz,
there must be a separation of at least 12.5 kHz between its
operating frequencies and those of any other equipment.
The channel table is the base station's database of channel
configurations. To view it, select Configure > Base Station >
Channel Table.
An IC which combines analog-to-digital conversion (coding)
and digital-to-analog conversion (decoding).
A configuration file consists of all the configuration settings
needed for a base station, stored as a file in the configurations
folder. Configuration files have the extension *.t8c.
A connection is a named group of settings that the Service Kit
uses when establishing communications with a BSS.
The control bus is used for communications between modules in
a base station system. It is an I2C bus, a bi-directional two-wire
serial bus which is used to connect integrated circuits (ICs). I2C
is a multi-master bus, which means that multiple chips can be
connected to the same bus, and each one can act as a master by
initiating a data transfer.
The control panel is an area at the front of the BSS with buttons,
LEDs and other controls that let you interact with the BSS.
CTCSS (continuous tone coded squelch system), also known as
PL (private line) is a type of signalling that uses subaudible tones
to segregate groups of users.
A custom action is a user-defined Task Manager action that
consists of more than one pre-defined action.
A custom input is a user-defined Task Manager input that
consists of a combination of pre-defined inputs.
Glossary 207