Connecting To A Base Station System - Tait TB8100 User Manual

Connecting to a Base Station System

38 Part C: Basic Tasks
Before you can work with a base station, you must connect to its
system (BSS).
1. Connect the Service Kit physically to the base station subrack. (For a remote
connection, this should already be in place: see TN-742 Remotely Monitoring
and Configuring the Tait TB8100.) For a direct connection, follow these
steps:
a. Connect one end of the supplied cable to the control panel serial port.
This cable is an ordinary (straight through) RS 232 cable and is available
separately (order code TBA0P10).
b. Connect the other end to a serial port on your computer. The serial port
to use is the one specified when the direct connection was set up and
configured.
2. Click Connect. The Connecting dialog box appears.
3. In the Connect to box, select a named connection from the drop-down
list. If no suitable connection exists, click Edit Connection or New
Connection to edit an existing connection or create a new one. For more
information, see "Setting Up and Configuring Connections" on page
4. Click OK. You can now log on to a particular base station.
base station
34.
MB8100-00-00-806 © TEL 2003