Versions - Tait TB8100 User Manual

Alarm status
Serial number
Hardware
Firmware
Calibrated
System interface
Viewing Power Amplifier Information
Module
Product code
Band
58 Part D: Monitoring
Indicates whether the reciter currently has any alarm conditions. If the LED is
green, there are no active reciter alarms. If the LED is red, the text box displays
'Alarms active,' and there is at least one active alarm. To see which alarm is
active, select Monitor > Alarms > Current Status.
A unique identifier assigned to the reciter in the factory.

Versions

The Versions area (Monitor > Module Details > Reciter) displays version
numbers for aspects of the reciter.
The version number of the reciter's hardware.
The version number of the reciter firmware and its creation date.
The date when the reciter was last modified using the Calibration Kit. (This
includes adjusting the switching range and tuning the frequency response.)
The version number of the system interface board installed in the reciter.
The Power Amplifier form (Monitor > Module Details > Power Amplifier) lets
you view information about the PA module of the base station you are logged
on to. Use it if you need to confirm exactly what it is that you are dealing with.
The name of the PA. This non-editable name is used internally to identify the
PA.
The product code and name for the type of PA.
The RF frequency range that the PA is type-approved to operate in.
MB8100-00-00-806 © TEL 2003