Tait TB8100 User Manual page 112

Mic
102 Part F: Configuring Channels
Repeater Options
In the Add or Edit Channel Profile dialog box, Signal Path tab, the Talk
through repeater box specifies the audio path from receiver to transmitter.
Option Description
Disabled There is no audio path. The base station does not function as a
repeater.
A-A The base station filters received audio using the receive Path A
filter and transmits it using the transmit Path A filter.
A-B The base station filters received audio using the receive Path A
filter and transmits it using the transmit Path B filter.
B-A The base station filters received audio using the receive Path B
filter and transmits it using the transmit Path A filter.
B-B The base station filters received audio using the receive Path B
filter and transmits it using the transmit Path B filter.
Note: You can vary the gain that the base station applies to talk
through audio. See
Microphone Panel
In the Add or Edit Channel Profile dialog box, Signal Path tab, the two Mic
drop-down lists specify the line output and transmit audio paths for any
microphone connected to the control panel.
The upper drop-down list specifies the microphone's line out audio path.
Option Description
None The microphone has no line audio path
Balanced Connects the microphone to the balanced line output
Unbalanced Connects the microphone to the unbalanced line output
The lower drop-down list specifies the microphone's transmit audio path.
Option Description
None The microphone has no audio path to the transmitter
Tx A Connects the microphone to the transmitter using the Path A
filter
Tx B Connects the microphone to the transmitter using the Path B
filter
Select Tx A or Tx B so that a technician can use a microphone
Tip:
to transmit using the base station.
"RF Configuration" on page
MB8100-00-00-806 © TEL 2003
96.