Adding An Over-The-Air Connection - Tait TB8100 User Manual

36 Part C: Basic Tasks
5. If your PC has more than one modem, select the one you want to use in the
Connect using box. Normally, you do not need to click Configure and
configure the PC's port to the modem. The default settings can be left as
they are.
6. In the Phone number box, enter the telephone number of the line to the
BSS's dial-up modem.
7. If the Service Kit needs to use the country code and the area code to access
the BSS, provide this information as follows.
a. In the Area code box, enter the BSS's area code.
b. In the Country code box, select the BSS's country code.
c. Select the Use country code and area code check box.
8. Set polling intervals that are appropriate to the speed of your connection.
The Alarms and Monitoring boxes specify the interval from one Service
Kit poll of the base station to another.
9. Click OK. The new connection now appears in the Connections dialog
box.

Adding an Over-the-Air Connection

For each BSS that is fitted with a radio modem, you need to define a
connection.
1. Select Tools > Configure Connections. The Connections dialog box
appears.
2. Click New. The New Connection dialog box appears.
3. In the Name box, enter a suitable name. The name should specify the BSS
and the connection type
4. In the Connection type box, select Over the Air.
The New Connection dialog box now looks like this:
MB8100-00-00-806 © TEL 2003