Customizing The Default Channel Profile - Tait TB8100 User Manual

Customizing the Default Channel Profile

88 Part F: Configuring Channels
The Edit Channel Profile dialog box lets you customize the default
profile to suit your system. Some items display 'See channel table.' You
configure them in the
different values.
To customize the default channel profile
1. Select Configure > Base Station > General.
2. In the Default profiles area, click Channel Profile. The Edit Channel Profile
form appears.
3. In the General tab, define the following:
a. The subaudible deviation if the base station will transmit with CTCSS
or DCS.
b. The talk-through repeater gain if the base station will be used as a
repeater.
c. The criteria for receiver gating (see
page 94).
4. In the Signal Path tab, do the following:
a. Use the check boxes to enable the audio paths you require. Enabled
paths are displayed as dark lines.
b. Select levels for any line inputs and outputs.
The base station can only provide line in and line out audio if
Note:
the system interface card fitted in the reciter has these audio
interfaces.
channel table so that you can give different channels
"Configuring Receiver Gating" on
channel
MB8100-00-00-806 © TEL 2003