Configuring The System Interface - Tait TB8100 User Manual

Configuring the System Interface

Viewing System Interface Details
Configuring External Channel Selection
TB8100 Service Kit User's Manual
The System Interface form (Configure > Base Station > System Interface) lets
you configure the base station's system interface.
Simple repeater applications do not require any interface.
The form displays the pin assignments and other information for the selected
system interface. It lets you configure the
channel selection lines.
You can view the pin assignments for the system interface.
1. Log on to the base station and select Monitor > Module Details > Reciter
to find out which system interface is fitted.
2. Select Configure > Base Station > System Interface.
3. In the Type list, select the system interface that has been fitted.
The table underneath the Type box now shows you the pin assignments for
that system interface. The pin assignments will update to reflect any changes
you make to external channel selection. See
Selection" on page 75.
Usually, the channel that the base station normally operates on is selected using
the Service Kit (see "Default channel" on page
be selected by equipment external to the base station, enable external channel
selection and configure the base station's system interface to reflect the way that
equipment works.
RSSI output line and the external
"Configuring External Channel
74). If you want the channel to
Configuring the System Interface 75