Profile name
Previous Profile
Next Profile
Tabs
110 Part F: Configuring Channels
Specifies the name of the profile. This name is used in the Channel Table and
Signalling Profile forms.
Displays the next profile. This means you don't need to return to the list of
profiles.
Displays the next profile in the list.
If you have made changes to the current profile, click
Important:
OK to confirm them before moving to another profile.
Subaudible Signalling
In the Add or Edit Signalling Profile dialog box, the Subaudible Signalling tab
specifies the
subtones
that the receiver recognizes and that the transmitter
applies. The base station supports
Most of the tab is taken up by a table. Each row in the table specifies a subtone
that the base station will recognize and the action that it will take. Default
subtones for the transmitter are specified in the Default encode signalling area.
CTCSS
frequencies and
MB8100-00-00-806 © TEL 2003
DCS
codes.