Changing Base Station Mode - Tait TB8100 User Manual

Changing Base Station Mode

Resetting the Base Station
TB8100 Service Kit User's Manual
Some Service Kit operations can only be carried out when the base station is
not in its normal operating mode.
To change the base station's operation mode
1. Click Mode. (Or, select Base Station > Change Mode.) If you have rights
to change mode, the Change Operating Mode dialog box appears.
2. Select the mode you want.
Modes that you don't have access rights to are disabled.
To leave Download mode, reset the base station. The Service Kit
displays the Connecting dialog box. Wait about 10 seconds for the base
station to start up, then re-connect and log on. The base station is now
in Standby mode.
3. Click OK.
You can reset the base station using the Service Kit.
1. Click Mode.
2. Click Reset Base Station.
3. Wait for the base station to restart, and then connect and log on again.
Changing Base Station Mode 41