Channel Profile Inputs - Tait TB8100 User Manual

176 Part I: Task Manager
PA fan servicing advised
The PA fan servicing advised input becomes true when the PA fan
operating time (Monitor > Data Logging > System Data) exceeds the hours in
the Operating time before servicing advised box (Configure > Alarms >
Thresholds).
Example
IF PA fan servicing advised THEN Email status now.
This can email the status message to the technician on duty. The status message
indicates that the PA fan needs servicing.
PMU fan servicing advised
The PMU fan servicing advised input becomes true when the PMU fan
operating time (Monitor > Data Logging > System data) exceeds the hours in
the Operating time before servicing advised box (Configure > Alarms >
Thresholds).
Example
IF PMU fan servicing advised THEN Email status now.
This can email the status message to the technician. The status message indicates
that the PMU fan needs servicing.
Power saving enabled
The override input Power saving enabled becomes true when Task
Manager turns the Power save system flag on. This occurs on entering Run
mode and if a Task Manager task enables power saving after a previous task has
disabled it.
Timer expired
A timer can only be started by the Task Manager action Start timer. It expires
when the timer's maximum time has elapsed. This time was entered in
Configure > Task Manager > Timers.
Example
IF Timer expired (Weekly Email) THEN Email status now.
This input can be used to set up regular actions such as emailing the status
message.
Tx relay enabled
The override input Tx relay enabled becomes true when Task Manager turns
the Tx relay system flag on. This occurs on entering Run mode and if a Task
Manager task enables power saving after a previous task has disabled it.

Channel Profile Inputs

Channel profile inputs relate to configuration items that are defined in channel
profiles. You can put tasks with a channel profile input into the folder for a
particular channel profile or into the General folder. If the task is in a channel
profile folder, it is only processed when the current channel uses that profile. It
the task is in the General folder, it is always processed.
MB8100-00-00-806 © TEL 2003