Configuring General Options - Tait TB8100 User Manual

Configuring General Options

Identification
Default profiles
Default channel
74 Part E: Configuring the Base Station
The General form (Configure > Base Station > General) names the base station
and specifies the default channel. From this form, you can customize the default
channel and signalling profiles. A panel on the right gives you high-level
instructions on how to configure channels in a simple system.
Specifies the name of the base station. Enter a suitable name. This name is used
in the Log On form to help you select the correct base station within the BSS.
You may need to disconnect and turn the base station off, and then turn the
base station on again and re-connect, before a new name appears in the log on
window and on the status bar.
Lets you configure default profiles. Click Channel Profile or Signal Profile
to open the editing dialog box for the corresponding default profile.
Specifies the default channel. Select a channel from the drop-down list to make
it the default channel (see
contains all the channels that have been defined in the channel table (Configure
> Base Station > Channel Table). Each entry in the list contains a channel
number followed by the corresponding channel name.
"Default Channel" on page 5). The drop-down list
MB8100-00-00-806 © TEL 2003